Poulan Pro 166120 Lawn Mower Manual

The Poulan Pro 166120 is a powerful lawn mower designed for efficient grass cutting with a 16-inch cutting deck. It features a reliable engine, adjustable cutting heights, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 16-inch cutting deck, adjustable cutting heights, lightweight design, and easy-start engine.

Installation

Unpack and inspect contents. Assemble the mower according to the instructions provided.

1. Attach the handle: Align and secure the handle to the mower body.
2. Check oil level: Ensure the engine oil is filled to the recommended level.
3. Fill fuel tank: Use fresh gasoline to fill the tank.
4. Inspect blades: Ensure blades are sharp and properly installed.

WARNING! Always wear safety gear when assembling and operating the mower.

First-Time Setup

Power on the mower; ensure all safety features are functional.

1. Check controls: Familiarize yourself with the throttle and safety switch.
2. Adjust cutting height: Set the desired cutting height before starting.
3. Perform a test run: Start the mower and check for proper operation.

CAUTION! Ensure the area is clear of obstacles before operating.

Specifications

• Cutting Width: 16 inches.
• Engine Type: 4-stroke gasoline engine.
• Weight: 40 lbs.
• Fuel Capacity: 1.5 quarts.
• Oil Capacity: 0.5 quarts.
• Cutting Heights: Adjustable from 1 to 3 inches.
• Warranty: 2 years limited warranty.

Controls and Settings

Access controls via the handlebar: throttle control, safety switch, and engine start.

Throttle: Adjusts engine speed for optimal cutting performance.

Safety Switch: Must be engaged for the mower to operate.

Connecting Devices

Ensure all connections are secure before starting the mower.

1. Check fuel and oil levels before each use.
2. Inspect the blade for damage or wear.
3. Ensure the safety features are functioning properly.

Tip: Always perform a pre-operation check to ensure safety.

Operating the Mower

Follow these steps to operate the mower safely and effectively.

1. Start the mower: Engage the safety switch and pull the starter cord.
2. Adjust speed: Use the throttle to set the desired speed.
3. Cutting: Move the mower in straight lines for an even cut.
4. Stop: Release the throttle and engage the safety switch to stop the engine.

WARNING! Never bypass safety features while operating the mower.

Maintenance

Regular maintenance is essential for optimal performance.

1. Clean the mower after each use: Remove grass clippings and debris.
2. Check and change oil regularly: Follow the schedule in the manual.
3. Sharpen blades: Keep blades sharp for a clean cut.
4. Inspect cables and connections: Ensure everything is in good condition.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

• Wear appropriate safety gear: goggles, gloves, and sturdy shoes.
• Keep children and pets away from the mowing area.
• Do not operate in wet conditions to avoid slipping.
• Always follow the manufacturer's instructions for safe operation.

Troubleshooting

Reset: Follow the manufacturer's instructions for resetting the mower if needed.

Service: For assistance, contact customer service at 1-800-555-0199.