Poulan Pro PP155H42 Lawn Mower Manual

The Poulan Pro PP155H42 is a powerful lawn mower designed for efficient grass cutting with a 155cc engine and a 42-inch cutting deck. It features a durable steel construction, adjustable cutting heights, and a comfortable grip for easy maneuverability. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 155cc engine, 42-inch cutting deck, adjustable cutting heights, rear bagger, and side discharge capabilities.

Feature	Description
Engine	155cc Poulan Pro engine for reliable performance
Cutting Deck	42-inch steel deck for efficient grass cutting
Cutting Heights	Adjustable cutting heights for customized lawn care
Rear Bagger	Collects grass clippings for easy disposal
Side Discharge	Allows for quick grass discharge while mowing
Comfort Grip	Ergonomic handle for comfortable operation

Installation

Unpack the mower and inspect all components. Ensure the mower is on a flat surface.

Attach the handle: Align and secure the handle to the mower body.
Check oil level: Ensure the engine oil is at the recommended level.
Fill with fuel: Use fresh gasoline suitable for small engines.
Inspect blades: Ensure blades are sharp and free from debris.

WARNING! Always wear protective gear when handling the mower.

First-Time Setup

Before starting the mower, ensure all safety checks are completed.

Check fuel and oil levels: Ensure both are filled to the recommended levels.
Adjust cutting height: Set the desired cutting height using the adjustment lever.
Start the mower: Follow the starting procedure outlined in the manual.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Engine: 155cc Poulan Pro engine.
Cutting Deck: 42 inches.
Cutting Heights: 1.5 to 4 inches adjustable.
Weight: Approximately 90 lbs.
Fuel Capacity: 1.5 quarts.
Oil Capacity: 0.5 quarts.
Drive Type: Push mower.

Controls and Settings

The mower features an easy-to-use control panel for starting and stopping the engine, adjusting the throttle, and setting the cutting height.

Throttle Control: Adjusts engine speed for optimal performance.

Start/Stop Switch: Located on the handle for easy access.

Connecting Devices

This section is not applicable for lawn mowers.

Operating the Mower

Follow these steps to operate the mower effectively:

Start the engine: Follow the starting procedure.
Adjust the throttle: Set to the desired speed.
Mow the lawn: Move the mower in straight lines for even cutting.
Stop the mower: Use the stop switch when finished.

WARNING! Do not operate on wet grass to avoid slipping.

Maintenance

Regular maintenance is essential for optimal performance and longevity.

Check oil level regularly and change as needed.
Sharpen blades at least once a season.
Clean the mower after each use to prevent grass buildup.
Inspect and replace air filter as necessary.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Always follow safety precautions when operating the mower:

Wear appropriate footwear and eye protection.
Keep children and pets away from the mowing area.
Do not operate the mower in wet conditions.
Read the manual thoroughly before use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issue	Check fuel level and quality; ensure choke is set correctly.
Uneven cutting	Blade issue	Sharpen or replace blades; adjust cutting height.
Mower stalls	Obstruction	Clear any grass or debris from the blades.
Excessive vibration	Loose parts	Check and tighten all screws and bolts.

Service: For further assistance, contact customer support.