Poulan Pro PXT15538 Lawn Mower Manual

The Poulan Pro PXT15538 is a powerful lawn mower designed for efficient grass cutting with a 155cc engine. It features a 38-inch cutting deck, adjustable cutting heights, and a durable construction suitable for residential lawns. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 155cc engine, 38-inch cutting deck, adjustable cutting heights, and ergonomic handle.

Feature	Description
Engine	155cc gas engine for reliable power
Cutting Deck	38-inch wide cutting deck for efficient mowing
Height Adjustment	Multiple cutting heights for customized lawn care
Ergonomic Handle	Comfortable grip for ease of use
Grass Bag	Rear bagging system for easy grass collection

Installation

Unpack and inspect contents. Assemble the mower according to the manual.

Attach the handle: Align and secure the handle to the mower body.
Install the grass bag: Attach the grass bag to the rear of the mower.
Check oil level: Ensure the engine oil is at the recommended level.
Fill with fuel: Use fresh gasoline to fill the tank.

WARNING! Always read the safety instructions before operating the mower.

First-Time Setup

Power on the mower and adjust the cutting height as needed.

Set the cutting height: Use the adjustment lever to select the desired height.
Start the engine: Follow the starting procedure outlined in the manual.
Test the mower: Make a few passes on the lawn to ensure proper operation.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Engine: 155cc gas engine.
Cutting Deck: 38 inches.
Cutting Heights: Adjustable from 1 to 4 inches.
Weight: Approximately 80 lbs.
Fuel Type: Unleaded gasoline.
Oil Type: SAE 30 or 10W-30.
Warranty: 2 years limited warranty.

Controls and Settings

Access controls on the handle for starting, stopping, and adjusting speed.

Throttle Control: Adjusts engine speed for optimal performance.

Height Adjustment Lever: Changes the cutting height easily.

Connecting Devices

No external devices are required for operation.

Operating the Mower

Follow these steps to operate the mower effectively.

Start the mower: Pull the starter cord firmly.
Begin mowing: Move the mower forward at a steady pace.
Adjust speed: Use the throttle control as needed.
Stop the mower: Release the throttle and allow the engine to idle before shutting off.

WARNING! Keep hands and feet away from the cutting deck while operating.

Maintenance

Regular maintenance is essential for optimal performance.

Check oil level: Inspect and change oil as needed.
Clean the cutting deck: Remove grass clippings and debris.
Sharpen blades: Ensure blades are sharp for effective cutting.
Inspect air filter: Clean or replace as necessary.

Care & Cleaning

Unplug and clean the mower after each use. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

This mower complies with all applicable safety standards and regulations. For support, visit www.poulanpro.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower won't start	No fuel or faulty spark plug	Check fuel level and replace spark plug if necessary.
Uneven cutting	Dull blades or uneven height settings	Sharpen blades and adjust cutting height.
Excessive vibration	Loose parts or damaged blades	Tighten loose parts and inspect blades for damage.
Grass clippings not bagging	Clogged chute or full bag	Clear the chute and empty the grass bag.

Reset: Refer to the manual for reset instructions if available.

Service: Contact customer service for further assistance.